Volkswagen ID.7 SOC wrong
Hi,
My id.7 Shows 60% soc but Livedata Shows only 20%.
Please help.
Alexander Ferrein
- Where does this happen?
- ABRP version number (found at bottom of settings menu)
Hi,
My id.7 Shows 60% soc but Livedata Shows only 20%.
Please help.
Alexander Ferrein
This request was merged into another request
Comments23
Mahde - ABRP
Oct 1
Hello @ABRP User #3191008,
Are you using OBD or Enode connection?
ABRP User #3191008
Oct 1
OBD-II Adapter
UniCarScan
UCSI-2000
Mahde - ABRP
Oct 1
Have you tried reconnecting your OBD device in ABRP to see if it gives correct SoC?
ABRP User #3191008
Oct 1
Yes, now Shows 31% SOC while car shows 89%
Mahde - ABRP
Oct 1
Do you know when this issue started or with any updates at ABRP? Have you had these issue going on previously?
ABRP User #3191008
Oct 3
Hi!
Sorry new User and newly installed App.
Just downloader and plugged in the obd Adapter.
Mahde - ABRP
Oct 5
Please provide screenshots of the SoC from the OBD and the app. What lights are turned on at the OBD device?
ABRP User #3191008
Oct 5
Hi,
here we go:
Mahde - ABRP
Oct 5
This could be an error with the PIDs of your vehicle that causes the SoC to differ by such a margin. We have an article about how to update the PIDs to change the SoC in this article here: OBD PID Editor
Since you have the OBD device and the vehicle in question, it would help us if you could change the numbers of the SoC to match up. You will need to find the correct PIDs and test then in the PID editor.
ABRP User #3191008
Oct 9
Sorry, took a while…
I went into the PID Editor and ran the tests.
The result came back as follows on the screenshot.
I then tried to edit the formula for the parameter 22028C. I removed anything in it and replaced it with plain “A". No change. I even tried to edit it to "a*3”. Still no change. Also I tried to reconnect the OBDdevice.
What can I do?
BTW: It there a way to export the test result into a file? I would rather read it on my computer with a decent file editor.
Thank you!
ABRP User #3191008
Oct 14
bump
Mahde - ABRP
Oct 16
Could you try following these instructions to get the correct SoC?
1 . In the PID Editor, open Data commands and add 223DEF directly after 220364.
2. Give it the mapping soc_bms with equation INT16(A:B)/100.
3. With the car awake (plugged in or just driven), go to Test PIDs and press Start. Don't press Save.
4. Send screenshots of the log and the full parsed list (scroll down), plus the SoC on the car's dashboard at the same moment.
5. Afterwards, tap Reset configuration to go back to the standard profile.
ABRP User #3191008
Oct 16
Hi,
attached you will find the results.
In short: the soc_bms value is pretty close. Only 2% under the displayed value.
Mahde - ABRP
Oct 16
We are not able to see the attached image sent. Could you try sending it again?
ABRP User #3191008
Oct 16
I cannot upload the pics. I tried to zip it but its not allowed to upload zips. Can I email you a link?
ABRP User #3191008
Oct 16
https://vault.freonit.com/#/send/bI1eDjasTua8QTIMujZVuQ/EjfOEBtaZ_vHMK7Ha0TdUQ
pls download asap it will delte itself after 24hs and after 2 tries.
Mahde - ABRP
Oct 16
Do you have a picture of what shows up in the vehicle compared to what ABRP show in the infotainment system? We can see the pictures shown in the latest link but we want to see how it differs between app and vehicle.
Mahde - ABRP
Oct 16
There is a picture in the file showing 57% SoC in the vehicle right now, what does it show for ABRP? If you say it differs with 2% then it would show this.
ABRP User #3191008
Oct 16
the result was 57% in the car and 59% in ABRP log.
ABRP User #3191008
Oct 16
After charging the car says 86% and the test result is 84% on the soc_bms and 31% in the app.
Mahde - ABRP
Oct 16
So the SoC in the ABRP app went down after you charged your vehicle? What happens when you drive the vehicle and the SoC drops, does the app SoC go up then or what do you observe?
ABRP User #3191008
Oct 1
Sorry no idea.
I just installed the app yesterday morning and plugged in my OBD connector today.
Can I help you with logs or anything else?
ABRP User #3191008
Oct 14
bump
Linked to MG5 displaying wrong SoC