Problem with OBD live data for Skoda Enyaq 85x
I am experiencing an issue with OBD live data on my Skoda Enyaq 85x MY2026. Vehicle: Skoda Enyaq 85x MY2026 ABRP vehicle profile: Skoda Enyaq 2026 85x ABRP version: 7.1.8 (6013) Connection: OBD/BLE The vehicle shows a battery SoC of 96%, while ABRP shows only 35%. However, the other OBD live data in ABRP appears to be correct: Battery capacity: 78 kWh Remaining energy (SoE): 76 kWh Battery voltage: 405 V Battery temperature: 18 °C 76 kWh out of 78 kWh corresponds to approximately 97% battery capacity, which closely matches the 96% shown by the vehicle. Therefore, the OBD connection itself appears to be working correctly, but ABRP seems to be reading or mapping the wrong value for SoC. The incorrect 35% value is live. It decreases while driving and increases while charging. Could you please check the OBD SoC mapping/PID for the Skoda Enyaq 85x MY2026? I have attached screenshots showing the vehicle SoC and ABRP live data.
- Where does this happen?
- ABRP version number (found at bottom of settings menu)
Log in to comment and vote
Comments8
Linda ABRP
Oct 20
This is fixed now and the SoC should be correct now.
ABRP User #757733
Oct 15
Exactly same problem for me, and I too own a new 2026 Skoda Enyaq 85. All other live data is coming through, but not SoC. Hope this PID update occurs soon.
Mahde - ABRP
Oct 2
Hello @ABRP User #3139228,
Could you explain in detail what the issue is?
ABRP User #3139228
Oct 2
die Batterieanzeige von der App ist falsch, und ich bekomme den Wert mit dem Auto nicht abgeglichen
Mahde - ABRP
Oct 2
How many percentages do the numbers differ to each other?
ABRP User #3139228
Oct 2
As already mentioned, 35 to 96 percent.
Mahde - ABRP
Oct 2
Does it not work when you try to reconnect the OBD to your vehicle?
ABRP User #757733
Oct 18
I have excatly same issue and similar Enyaq 85.
I conducted a PID test via the ABRP app and under the Parsed TLM data results it reports “ soc 29.99” yet my driving screen corectly shows 78%. All other info on the PID test (eg battery temp, battery capacity, odometer, parked etc), comes through correctly.
I have used the ABRP planner to connect via the OBE, and got three green ticks to confirmed succesful connection to the brand new OBDLink CX.
The ABRP app shows a green dot that says connected, and I when a look under Live Data, I can see the “OBD data” field running regular reads and writes.
Despite having a live connection (green dot), I can manually slide the SoC to another reading, and when I then press the “Use Live SoC” refresh, it goes back to the incorrect reading.
Interestingly, despite the incorrect lower SoC reading, it does decrease incrementally as the car is driving, at about the same rate as the car’s actual displayed SoC.
ABRP is not capturing / displaying / refreshing the correct PID info for Live SoC.
Skoda Enyaq 2026 85. OBDLink CX (at ABRP’s recommendation!!). iPhone. ABRP version 7.1.12 (6050). Settings set to “Using automatic settings”