Join our newly restarted iOS Beta and try out new features sooner: https://testflight.apple.com/join/PDzBYbJw
Read more about ABRP beta at Installing the ABRP Beta version
I use ABRP premium as my route planner. It’s great for location and navigation. However, the app pulls its battery charge percentage data from MyCitroen. Since this Stellantis app is unstable half the time (….) , how can I bypass it while still getting charge information into ABRP? Ideally, without using a dongle.
Hello, I own a Mercedes-Benz eVito 119 Panel Van (W447, FWD, 90 kWh usable battery). I am using ABRP Premium with Enode, and the connection works correctly. However, I would like to receive more frequent live battery data updates while driving. I am considering purchasing an OBDLink CX Bluetooth BLE adapter. Could you please confirm: Does ABRP support live battery SoC readings from my specific eVito model through OBDLink CX and Car Scanner? Does this setup support automatic consumption calibration? Can OBDLink CX be used alongside my existing Enode connection? Does the adapter automatically enter sleep mode when the vehicle is parked and switched off? Thank you for your help.
Hi ABRP Support Team, I am a Zeekr 7X owner and a frequent user of A Better Routeplanner. I am writing to request full live data integration, OTA and dedicated OBD2/BLE profile support for the Zeekr 7X. Currently, the vehicle is only available as a "Generic" model in the app, meaning we cannot connect live telemetry, track real-time State of Charge (SoC), or monitor driving and charging data through BLE dongles or cloud API bridges. The Zeekr 7X is built on an advanced 800V architecture and is seeing rapidly growing adoption globally. Having live data integration—especially for real-time consumption and automatic battery preconditioning awareness—would make ABRP an incredibly powerful tool for the Zeekr community. I want to explicitly state that I am ready and waiting to upgrade to an ABRP Premium subscription the moment this live data integration is solved. I know many other Zeekr 7X owners who are in the exact same position and willing to subscribe once our cars are properly supported. Could you please provide an update on whether the Zeekr 7X telemetry mapping (PIDs/Cloud API) is currently on your development roadmap or in alpha testing? Thank you for your hard work and for continuously expanding the platform's supported vehicles. Best regards,
Hello, I can't connect ABRP to my ID4 and my My VW account. I've tried Enode and Tronity. What should I do? Will I be able to see battery data in the app?
Hello ABRP Support Team, I am using an Opel Frontera Electric Extended Range with ABRP on an iPhone, integrated with Car Scanner for live vehicle data. I am experiencing an intermittent issue where the battery State of Charge (SoC) stops updating in both Car Scanner and ABRP. The issue occurs randomly, and the SoC sometimes appears to remain stuck at an incorrect value. When this happens: ● Car Scanner’s BMS State of Charge value appears to freeze. ● ABRP also stops receiving updated SoC data. ● ABRP’s current battery percentage and estimated arrival SoC become unreliable. ● Route planning and remaining energy estimates may no longer reflect the vehicle’s actual battery state. ● Other OBD values, such as voltage or power, may continue updating while the SoC appears stuck. The applications are integrated and configured to share live data, but the issue still occurs intermittently. Could you please investigate whether this could be related to the Car Scanner live-data integration, BMS SoC PID handling, stale data caching, or an iOS background execution issue? Please also advise whether there is a recommended workaround or a known issue affecting the Opel Frontera Electric Extended Range. I can provide an event log and additional screenshots if needed. Thank you.
Does ABRP support OBD live battery data for the U.S.-market 2025 Genesis Electrified GV70, using the OBDLink CX? The Genesis profile only shows the option for a Tri Motor AWD, so I checked the Hyundai IONIQ 5 instead which is built with similar hardware. Can I use its OBD profile, or does the GV70 require different PIDs?
Subject: Toyota Proace City Verso Electric 2025 – OBD PID compatibility and safety issue Hello ABRP Support Team, I own a 2025 Toyota Proace City Verso Electric with a 50 kWh battery. I would like to connect my vehicle to ABRP to automatically retrieve the battery State of Charge (SOC). I previously attempted to use an OBDLink MX+ adapter, but the vehicle experienced serious issues when the OBD connection became active: Loss of READY mode Vehicle electronics restarting or shutting down Collision prevention system warnings Other dashboard errors The problems disappeared after disconnecting the OBD adapter. I also attempted to connect through Enode using MyToyota, but no vehicles were found. Could you please confirm: Is my exact 2025 vehicle model officially supported by ABRP via OBD? Which ECU addresses, OBD commands and PIDs are verified for this vehicle? Is there a known issue involving ECU resets or loss of READY mode on Stellantis K9-based electric vehicles? Is there a confirmed safe configuration for reading SOC? Is there a way to read SOC passively without sending diagnostic requests? I do not want to reconnect the OBD adapter until the safety issue has been investigated. Thank you for your assistance.
So my car (Peugeot e-5008) shows a tampered SOC on the dashboard and in Android Auto. I know it is “corrected” to provide some sort of user experience improvement, because I can read the actual SOC using my OBD reader. At full charge, the SOC reported by OBD is between 90 and 97% (depending on temperature), while the dashboard always shows 100% at full charge. As I start a trip, the SOC from the OBD decreases as expected while the dashboard SOC stays at 100 for an unrealistically long time, until it suddenly decreases to sort of match the OBD SOC. I say sort of matches, since there is almost always a difference between the two values, of up to 5%. The difference depends on temperature and the SOC ( the difference is least around 50% SOC), and it can be both positive and negative. My Abrp live data streams data from CarScanner, which reads the OBD SOC. Sometimes it also reads from Android Auto. Because the two values often differ, ABRP thinks the SOC switches back and forth, which negatively influences the route planning while driving. Sometimes a new route is suggested because of this. I suggest to provide an option to block specific data streams (like Android Auto SOC) if a more reliable source is available (like OBD SOC).
Please support the Fisker Ocean with these PIDs (FO_CustomPID.json). They have been tested and verified via the OBDII port, covering key live telemetry.
Feature Request: Custom Local Telemetry Provider (HTTP/MQTT) Description Allow ABRP to retrieve live vehicle telemetry directly from a configurable local HTTP endpoint or MQTT broker, without requiring telemetry to be uploaded to ABRP's cloud servers. Use Case Some vehicles, particularly BYD models running Android, already have applications capable of reading vehicle telemetry locally. For example, BYD Trip Stats provides: A local HTTP server (Web Companion). MQTT telemetry publishing. Real-time vehicle data, including SoC, speed, power consumption, and GPS. Currently, integrating this data with ABRP requires sending telemetry through the cloud API, even when both applications are running on the same Android device. Proposed Solution Add a Custom Local Telemetry Provider supporting: HTTP: Configurable endpoint (e.g., http://127.0.0.1:8888/api/telemetry). MQTT: Configurable broker address and topic. Configurable polling intervals. JSON field mapping for SoC, speed, power, GPS, etc. Optional authentication. Benefits No mobile data required for live telemetry. Lower latency. Better privacy by keeping vehicle telemetry local. Compatibility with existing telemetry applications. Support for offline telemetry when Internet connectivity is unavailable. This would make ABR
Hi I'm a premium user of ABRP, but I can't figure out how to get live data via enode working as a quest user in my VW Id.3. It's only possible to have 1 primary user on the VW. I'm on Android 15 and got the newest version of ABRP 7.1.8
Please look into the info provided by me at https://github.com/jpires71/Deepal_S05_PIDs/blob/main/README.md and improve the live data adding more accurate SOH and EFC for this model and eventually for others too when possible.
This weekend we got our 2027 Volvo EX 60. I’ve been a user of ABRP for six or seven years. I’m familiar with the interface and yet must be missing something. I am not getting love data through the android system in the Volvo (with ABRP installed from Play store), nor am I getting the option in the app to use Encode. Please advise on either approach to getting live data. Thank you!
Would like android auto or odb live data connection. It was available about 3 months ago but there is no longer any way to connect to the app.
Awaiting live data tailored to my 2026 Trailseeker Touring. Currently using Solterra as a workaround, which is close-ish. But they are different vehicles. To clarify, I understand that I can identify the vehicle, but in Live Data options I only see Enode and Generic as a Trailseeker. I have to set it to Solterra to see the ABRP Live Data options.
I have this vehicle model configured based on manufacturer data: https://abetterrouteplanner.com/home/app/vehicles/import/01a09b42-ae0c-78cd-89ca-31f6711400df I purchased a OBDLink CX with the expectation that I could just simply link it via ABRP (similar to what is possible with the Cupra Born). I only have the options Encode, Car Scanner and Generic. What is the correct way to configure this and what is necessary to have the Raval show the OBD Connection mode?