We have a 2024 Voyah Free model already in ABRP. Please specify the difference of your vehicle request to the one that already exists/
ABRP User #1373137
•
Oct 15
Ok, thank you for your answer! I use a Veepeak OBDCheck BLE+ Bluetooth OBD2 module, linked to ABPR, but no data is coming through. So I thought the reason for that was that behind model Voyah Free in ABPR it still says ‘estimate’. But if it only means that data should come through but not yet fully calibrated it might be the module then. Or maybe you have a suggestion to create the correct sensor to integrate… In ABPR , under live data, only the location is shown… it does however say ‘connected’ to <Car Scanner>.
Mahde - ABRP
Team•
Oct 15
Car Scanner is quite new to us in ABRP as we added it recently. Could you try doing the following to see if you can get the SoC from the vehicle?
In ABRP, go to Live Data, pick Car Scanner and copy the token. In Car Scanner, turn on its ABRP setting with that token and set their custom SoC PID as the SoC value. Then keep Car Scanner running while driving, and don't connect the dongle from ABRP's own OBD screen at the same time, because only one app can use it.
You might need to make changes to the PIDs of the vehicle if you values are not the same, but please send us the information you receive after the instructions I sent above. It might not work as it can differ from vehicle to vehicle but we will continue with other procedures to see if these give results for the SoC in your case.
Log in to comment and vote
Comments3
Mahde - ABRP
Oct 15
Hello @ABRP User #1373137,
We have a 2024 Voyah Free model already in ABRP. Please specify the difference of your vehicle request to the one that already exists/
ABRP User #1373137
Oct 15
Ok, thank you for your answer! I use a Veepeak OBDCheck BLE+ Bluetooth OBD2 module, linked to ABPR, but no data is coming through. So I thought the reason for that was that behind model Voyah Free in ABPR it still says ‘estimate’. But if it only means that data should come through but not yet fully calibrated it might be the module then. Or maybe you have a suggestion to create the correct sensor to integrate… In ABPR , under live data, only the location is shown… it does however say ‘connected’ to <Car Scanner>.
Mahde - ABRP
Oct 15
Car Scanner is quite new to us in ABRP as we added it recently. Could you try doing the following to see if you can get the SoC from the vehicle?
In ABRP, go to Live Data, pick Car Scanner and copy the token. In Car Scanner, turn on its ABRP setting with that token and set their custom SoC PID as the SoC value. Then keep Car Scanner running while driving, and don't connect the dongle from ABRP's own OBD screen at the same time, because only one app can use it.
You might need to make changes to the PIDs of the vehicle if you values are not the same, but please send us the information you receive after the instructions I sent above. It might not work as it can differ from vehicle to vehicle but we will continue with other procedures to see if these give results for the SoC in your case.